1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CC5181P-VP
  6. User manual

HIKVISION DS-2CC5181P-VP User Manual

Day/night high-definition dome camera
Hide thumbs Also See for DS-2CC5181P-VP:
Table of Contents

Advertisement

Quick Links

Download this manual
Day/Night High-definition

Dome Camera

V1.2.0
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CC5181P-VP

Summary of Contents for HIKVISION DS-2CC5181P-VP

  • Page 1: Dome Camera

    Day/Night High-definition Dome Camera V1.2.0 User Manual...
  • Page 2 Day/Night High-definition Dome Camera·User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to DS-2CC5181P-VP(IR)(H), DS-2CC5191P-VP(IR)(H), DS-2CC51A1P-VP(IR)(H) dome Camera. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.

  • Page 3: Regulatory Information

    Day/Night High-definition Dome Camera·User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 Day/Night High-definition Dome Camera·User Manual 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 5: Safety Warnings And Cautions

    Day/Night High-definition Dome Camera·User Manual Safety Warnings and Cautions Please pay attention to the following warnings and cautions: Hazardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user. This device should only be used by Employees from our company with knowledge and training in working with these types of devices that contain live circuits.
  • Page 6 Day/Night High-definition Dome Camera·User Manual attached is also connected to properly wired grounded receptacles and are approved medical devices. Power Connect and Disconnect: The AC power supply cord is the main disconnect device to mains (AC power).The socket outlet shall be installed near the equipment and shall be readily accessible.
  • Page 7 Day/Night High-definition Dome Camera·User Manual Perchlorate Material: Special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This device includes a battery which contains perchlorate material. Taiwan battery recycling: Please recycle batteries.
  • Page 8 Day/Night High-definition Dome Camera·User Manual Lead Content: Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling; do not dispose of device in unsorted municipal waste.

  • Page 9: Safety Instruction

    Day/Night High-definition Dome Camera·User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 10 Day/Night High-definition Dome Camera·User Manual responsibility for problems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this  product to rain or moisture. This installation should be made by a qualified service person ...
  • Page 11 Day/Night High-definition Dome Camera·User Manual The sensor may be burned out by a laser beam, so when any  laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot or cold temperatures ...

  • Page 12: Table Of Contents

    Day/Night High-definition Dome Camera·User Manual Table of Contents 1 Introduction ..............1 1.1 Product Features ..........1 1.2 Function Summary ..........2 1.3 Overview .............5 2 Installation ..............6 2.1 Disassembling ............6 2.2 Mounting .............7 2.2.1 Ceiling Mounting ..........7 2.2.2 In-ceiling Mounting with gang box ....10 2.2.3 In-ceiling Mounting without gang box ...
  • Page 13 Day/Night High-definition Dome Camera·User Manual 3.14 LANGUAGE Setting..........45 3.15 CAMERA RESET Setting ........45 Appendix ................ 46 Table 1 DS-2CC5181P(N)-VP(IR)(H) ......46 Table 2 DS-2CC5191P(N)-VP(IR)(H) ......50 Table 3 DS-2CC51A1P(N)-VP(IR)(H) ......54...

  • Page 14: Introduction

    Day/Night High-definition Dome Camera·User Manual 1 Introduction 1.1 Product Features This camera adopts high performance CCD and advanced print circuit board design technology. It possesses of high resolution, low distortion, and low noise features, etc. It is extremely suitable for supervisory system and image process system. Adopt high performance SONY CCD, and supply high definition ...

  • Page 15: Function Summary

    Day/Night High-definition Dome Camera·User Manual Support Privacy mask with 8 optional colors and 8 configurable  areas Advanced design technology with high reliability  Advanced 3-axis design allows this dome camera to be  adjusted 0-355° horizontally and 0-180° vertically to meet different mounting requirements Adopt advanced double-plate design to guarantee the heat ...
  • Page 16 Day/Night High-definition Dome Camera·User Manual Figure 1-1 Privacy Mask DAY/NIGHT Auto Switch: The cameras deliver color images during the day. And as light diminishes at night, the cameras switch to night mode and deliver black and white images with high quality.
  • Page 17 Day/Night High-definition Dome Camera·User Manual Internal synchronization is realized by the synchronous signal which is generated by the inside crystal oscillator. White Balance: White balance can remove the unrealistic color casts. White balance is the white rendition function of the camera to adjust the color temperature according to the environment automatically.

  • Page 18: Overview

    Day/Night High-definition Dome Camera·User Manual 1.3 Overview Figure 1-3 Dome Overview...

  • Page 19: Installation

    Day/Night High-definition Dome Camera·User Manual 2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. Note: Please ensure that the wall is strong enough to withstand three times the weight of the camera.

  • Page 20: Mounting

    Day/Night High-definition Dome Camera·User Manual Figure 2-1 Removing the Lower Dome 4. Loosen the three screws as shown in Figure 2-2 with the supplied screw driver. 5. Remove the camera from the back box. Set Screws Figure 2-2 Removing the Camera 2.2 Mounting 2.2.1 Ceiling Mounting Steps:...
  • Page 21 Day/Night High-definition Dome Camera·User Manual Ceiling Drill Template Figure 2-3 The Drill Template 3. If you want to route the cables inside the ceiling, drill a hole in the ceiling according to the circle in the centre of the template. Skip this step, if you want to route the cables on the surface of the ceiling.
  • Page 22 Day/Night High-definition Dome Camera·User Manual Figure 2-4 Securing Back box 6. Route the cables through the hole in the center of the drill template. 7. Align the camera with the back box. 8. Tighten the set screws to secure the camera with the back box. 9.

  • Page 23: In-Ceiling Mounting With Gang Box

    Day/Night High-definition Dome Camera·User Manual Figure 2-5 Securing Lower Dome 2.2.2 In-ceiling Mounting with gang box Steps: 1. Install the gang junction box in the ceiling. 2. Attach the In-ceiling Mount (supplied) to the gang junction box with two screws.
  • Page 24 Day/Night High-definition Dome Camera·User Manual Ceiling In-ceiling Mount Gang Box Figure 2-6 In-ceiling Mount 3. Route the cables through the hole in the center of the in-ceiling mount. 4. Align the camera with the gang junction box. 5. Tighten the screws to secure the camera with the gang junction box.
  • Page 25 Day/Night High-definition Dome Camera·User Manual Gang Box Ceiling In-ceiling Mount Camera Figure 2-7 Securing Camera 8. Install the inner black liner back to the camera. 9. Align the lower dome with the in-ceiling mount. 10. Tighten the screws to secure the lower dome with the in-ceiling mount.

  • Page 26: In-Ceiling Mounting Without Gang Box

    Day/Night High-definition Dome Camera·User Manual 2.2.3 In-ceiling Mounting without gang box Steps: 1. Attach the drill template (supplied) to the place where you want to fix the camera. 2. According to the circles on the drill template as shown in Figure 2-9, drill screws holes in the ceiling on your demand.
  • Page 27 Day/Night High-definition Dome Camera·User Manual 6. Tighten the screws. Then rotate the spring clips counterclockwise to tightly secure the in-ceiling mount with the ceiling. Spring Clips In-ceiling Mount Figure 2-10 The In-ceiling Mount 7. Route the cables through the hole in the center of the in-ceiling mount.
  • Page 28 Day/Night High-definition Dome Camera·User Manual Figure 2-11 Securing Camera 12. Install the inner black liner back to the camera. 13. Align the lower dome with the in-ceiling mount. 14. Tighten the screws to secure the lower dome with the in-ceiling mount.

  • Page 29: Outdoor Wall Mounting

    Day/Night High-definition Dome Camera·User Manual 2.2.4 Outdoor Wall Mounting For the wall mounting, you have to purchase a wall mount. Steps: 1. Secure the wall mount to the wall. 2. Loosen the three set screws on the edge of the front panel. Remove the front panel.
  • Page 30 Day/Night High-definition Dome Camera·User Manual 7. Adjust the image and focus. Please refer to the section 2.3 for more detailed information. Figure 2-14 Securing Camera 8. Install the inner black liner back to the camera. 9. Align the lower dome with the camera. 10.
  • Page 31 Day/Night High-definition Dome Camera·User Manual Figure 2-15 Securing Lower Dome 11. Tighten the set screws to secure the front panel to the mount.
  • Page 32 Day/Night High-definition Dome Camera·User Manual Figure 2-16 Securing Front Panel The DS-1242ZJ and DS-1243ZJ mounts are shown as follows: DS-1242ZJ DS-1243ZJ...

  • Page 33: Indoor Wall Mounting

    Day/Night High-definition Dome Camera·User Manual 2.2.5 Indoor Wall Mounting For the wall mounting, you have to purchase a wall mount. Steps: 1. Align the number 2 holes of the back box with the number 1 holes of the wall mount. 2.
  • Page 34 Day/Night High-definition Dome Camera·User Manual 7. Adjust the image and focus. Please refer to the section 2.3 for more detailed information. Figure 2-18 Securing Camera 8. Install the inner black liner back to the camera. 9. Align the lower dome with the camera. 10.

  • Page 35: Image And Focus Adjusting

    Day/Night High-definition Dome Camera·User Manual Figure 2-19 Securing Lower Dome The DS-1229ZJ and DS-1239ZJ mounts are shown as follows: DS-1229ZJ DS-1239ZJ 2.3 Image and Focus Adjusting Steps: 1. Three-axis adjustment. 1). View the camera image using the monitor. 2). Rotate the panning table to adjust the panning position of the camera.
  • Page 36 Day/Night High-definition Dome Camera·User Manual Rotation Tilt Tilting Lock Screw Figure 2-20 Three-axis Adjustment 2. Zoom and focus adjustment. 1). View the camera image using the monitor. 2). Loosen the zoom lock screw and move the screw between T(Tele) and W(Wide) to obtain the appropriate angle of view.
  • Page 37 Day/Night High-definition Dome Camera·User Manual Zoom Lock Screw Tilting Lock Screw Focus Lock Screw Menu Button Auxiliary Video Output Connector Figure 2-21 Lens Adjustment...

  • Page 38: Menu Description

    Day/Night High-definition Dome Camera·User Manual 3 Menu Description 3.1 MAIN MENU Steps: 1. Press the button to access the main menu or the submenu. 2. Set the menu button up/down to position the cursor. 3. Set the menu button left/right to select the different options. SETUP MENU LENS AUTO8...

  • Page 39: Lens Setting

    Day/Night High-definition Dome Camera·User Manual 3.2 LENS Setting After moving the cursor to LENS, set the menu button up/down to select MANUAL or AUTO. Selecting MANUAL mode, you have to adjust the LENS IRIS  manually. Selecting AUTO mode, press the button to enter the AUTO IRIS ...

  • Page 40: Shutter/Agc Setting

    Day/Night High-definition Dome Camera·User Manual 3.3 SHUTTER/AGC Setting SHUTTER/AGC allows you to adjust how the system balances SHUTTER and AGC settings in different light conditions. You can set the different shutter and AGC value according to the luminance level of the situation. You can choose MANUAL and AUTO mode for the shutter and AGC.
  • Page 41 Day/Night High-definition Dome Camera·User Manual 1/100k are selectable. The AGC value can be set between 6 and 44.8. AUTO SETUP HIGH LUMINANCE MODE SHUT+AUTO IRIS/AUTO IRIS BRIGHTNESS - - - | - - - 080 LOW LUMINANCE MODE BRIGHTNESS *0.50 RETURN8 Figure 3-4 AUTO SETUP In the AUTO SETUP submenu (Figure 3-4), you can adjust the...

  • Page 42: White Balance Setting

    Day/Night High-definition Dome Camera·User Manual option is provided. BRIGHTNESS The value ranges from 0 to 255. In LOW LUMINANCE condition, the AGC can be adjusted automatically according to the BRIGHTNESS value. MODE Only AGC is available. BRIGHTNESS ×1.00, ×0.75, ×0.50 and ×0.25 are selectable.
  • Page 43 Day/Night High-definition Dome Camera·User Manual Selecting this feature, the system suppresses the color rolling under the fluorescent light when processing the color balance. USER 1  This mode is the indoor mode. It is suitable for indoor application. B-GAIN It’s used to adjust the picture output in the blue range.
  • Page 44 Day/Night High-definition Dome Camera·User Manual R-GAIN The R-GAIN value ranges from 0 to 255. MANUAL  Selecting MANUAL and pressing the button to enter the MANUAL WB submenu. Customize the LEVEL value on your demand. MANUAL WB LEVEL - - - | - - - 064 RETURN8 Figure 3-6 MANUAL WB ...

  • Page 45: Backlight Setting

    Day/Night High-definition Dome Camera·User Manual DELAY CNT It’s the delay time between monitoring the light conditions changing and adjusting the white balance. ATW FRAME It’s used to adjust the image size of the ATW image. × 0.50, ×1.00, ×1.50 and × 2.00 are available.

  • Page 46: Picture Adjust Setting

    Day/Night High-definition Dome Camera·User Manual If there’s a strong backlight, the object in front of the backlight appears silhouetted or dark. BLC can correct the exposure of the subject. But the backlight environment is overexposed. HLC(Highlight Compensation)  HLC masks strong light sources that usually flare across a scene. This makes it possible to see the detail of the image that would normally be hidden.

  • Page 47: Atr Setting

    Day/Night High-definition Dome Camera·User Manual Adjust this feature to change the color of the image. The value ranges from 0 to 255. GAIN  Adjust this feature to change the depth of the color. The value ranges from 0 to 255. PICT ADJUST MIRROR BRIGHTNESS...

  • Page 48: Motion Detection Setting

    Day/Night High-definition Dome Camera·User Manual LUMINANCE There are MID, HIGH, LOW selectable, standing for middle, high and low luminance respectively. CONTRAST There are MID, HIGH, LOW, MIDLOW and MIDHIGH selectable. LUMINANCE CONTRAST RETURN8 Figure 3-9 ATR 3.8 MOTION DETECTION Setting There are two kinds of MOTION DET panes, BLOCKDISP and MONITOR AREA.
  • Page 49 Day/Night High-definition Dome Camera·User Manual 2. Position the cursor on DETECT SENSE, set the menu button left/right to adjust the sensitivity level. 3. Position the cursor on BLOCK DISP, set the menu button left/right to select ENABLE. 4. Press the button to enter the setup interface of the detection panes.
  • Page 50 Day/Night High-definition Dome Camera·User Manual 4. Position the cursor on AREA SEL to select one area. There are four areas available. 5. Set the values of TOP, BOTTOM, LEFT and RIGHT. The size and position of the area is defined by these values. And after you set all this value, you can see a frame on the image.

  • Page 51: Privacy Mask Setting

    Day/Night High-definition Dome Camera·User Manual 3.9 PRIVACY MASK Setting This feature allows you to cover certain areas which you don’t want to be viewed or recorded. The size, color, transparency of the areas is adjustable. Steps: 1. After moving the cursor to PRIVACY, press the button to enter PRIVACY submenu.

  • Page 52: Day/Night Setting

    Day/Night High-definition Dome Camera·User Manual PRIVACY AREA SEL - - - | - - - 000 BOTTOM - - - | - - - 000 LEFT - - - | - - - 000 RIGHT - - - | - - - 000 COLOR TRANSP 0.00...
  • Page 53 Day/Night High-definition Dome Camera·User Manual 1. After moving the cursor to DAY/NIGHT, set the menu button left/right to select AUTO. 2. Press the button to enter the submenu. BURST Select ON or OFF to enable or disable this feature. DELAYCNT The value ranges from 0 to 255.

  • Page 54: Nr Setting

    Day/Night High-definition Dome Camera·User Manual B/W Mode Setting In the B/W submenu, you can enable or disable the BURST. BURST RETURN8 Figure 3-13 B/W 3.11 NR Setting This feature is used to reduce the noise in the video signal. After moving the cursor to NR, press the button to enter the NR submenu.

  • Page 55: Camera Id Setting

    Day/Night High-definition Dome Camera·User Manual Y LEVEL - - - | - - - 004 RETURN8 Figure 3-14 NR 3.12 CAMERA ID Setting In Camera ID submenu, you can customize the camera ID. It also allows you to adjust the camera ID position on the monitor screen. Select OFF, if you want to disable the Camera ID.
  • Page 56 Day/Night High-definition Dome Camera·User Manual 4. Repeat the steps 1 through 3 to select other characters. Modifying the camera ID Steps: 1. Position the cursor on one of the arrows. 2. Press the button to position the cursor on the character that needs to modify.

  • Page 57: Sync/Pixel Correct Setting

    Day/Night High-definition Dome Camera·User Manual CAMERA ID ABCDEFGHIJKLMNOPQRSTUV WXYZ0123456789-!”#$%&’ ()_`,¥ :;<=>?@\^*.x+/ CHR1 CHR2 ← → ↑ ↓ CLR POS8 RETURN8 Figure 3-15 CAMERA ID 3.13 SYNC/PIXEL CORRECT Setting Both internal and line lock synchronization are available. (Only the camera which supports DC 12 V and AC 24 V power has line lock synchronization.) If 12V DC power supply is applied, SYNC mode is internal ...

  • Page 58: Language Setting

    Day/Night High-definition Dome Camera·User Manual 3.14 LANGUAGE Setting You can adjust the language of the on-screen menu. The factory default language is English. Steps: 1. Move the cursor to LANGUAGE. 2. Set left/right to select the language you need. 3.15 CAMERA RESET Setting After moving the cursor to CAMERA RESET, press the button to reset all camera settings to factory default parameters.

  • Page 59: Table 1 Ds-2Cc5181P(N)-Vp(Ir)(H)

    Day/Night High-definition Dome Camera·User Manual Appendix Table 1 DS-2CC5181P(N)-VP(IR)(H) Specification DS-2CC5181P(N)-VP(IR)(H) Model 600 TVL CCD ICR Weather-proof Vandal-proof Parameter Dome Camera Camera Image Sensor 1/3” SONY Super HAD CCD II Signal System PAL/NTSC PAL: 752 (H) × 582 (V) Effective Pixels NTSC: 768 (H) ×...
  • Page 60 Day/Night High-definition Dome Camera·User Manual Angle of view: 92° - 27.2° Lens Mount φ14 Auto Iris DC drive Angle Adjustment Pan: 0 - 355° , Tilt: 0 - 80° , Rotation: ± 90° Day & Night IR cut filter with auto switch Horizontal Resolution 600 TVL (Color), 650 TVL (B/W) Synchronization...
  • Page 61 Day/Night High-definition Dome Camera·User Manual SMART IR, ATR, HLC, DNR, Sharpness, Function Brightness, Contrast, Hue, Gain, Mirror, Defect Pixel Correction General -10 ° C - 60 ° C (14 ° F - 140 ° F) Humidity 90% or less (non-condensing) Operating Conditions -H: -40 °...
  • Page 62 Day/Night High-definition Dome Camera·User Manual Dimension Unit: mm Dimension with DS-1240ZJ: Unit: mm...

  • Page 63: Table 2 Ds-2Cc5191P(N)-Vp(Ir)(H)

    Day/Night High-definition Dome Camera·User Manual Table 2 DS-2CC5191P(N)-VP(IR)(H) Specification DS-2CC5191P(N)-VP(IR)(H) Model 650 TVL CCD ICR Weather-proof Vandal-proof Parameter Dome Camera Camera Image Sensor 1/3” SONY EXView HAD CCD II Signal System PAL/NTSC PAL: 976 (H) × 582 (V) Effective Pixels NTSC: 976 (H) ×...
  • Page 64 Day/Night High-definition Dome Camera·User Manual Lens Mount φ14 Auto Iris DC drive Angle Adjustment Pan: 0 - 355° , Tilt: 0 - 80° , Rotation: ± 90° Day & Night IR cut filter with auto switch Horizontal Resolution 650 TVL (Color), 700 TVL (B/W) Synchronization Internal/Power synchronization 1Vp-p composite output (75 Ω/BNC);...
  • Page 65 Day/Night High-definition Dome Camera·User Manual SMART IR, ATR, HLC, DNR, Sharpness, Function Brightness, Contrast, Hue, Gain, Mirror, Defect Pixel Correction General -10 ° C - 60 ° C (14 ° F - 140 ° F) Humidity 90% or less (non-condensing) Operating Conditions -H: -40 °...
  • Page 66 Day/Night High-definition Dome Camera·User Manual Dimension Unit: mm Dimension with DS-1240ZJ: Unit: mm...

  • Page 67: Table 3 Ds-2Cc51A1P(N)-Vp(Ir)(H)

    Day/Night High-definition Dome Camera·User Manual Table 3 DS-2CC51A1P(N)-VP(IR)(H) Specification DS-2CC51A1P(N)-VP(IR)(H) Model 700 TVL CCD ICR Weather-proof Vandal-proof Parameter Dome Camera Camera Image Sensor 1/3” SONY EXView HAD CCD II Signal System PAL/NTSC PAL: 976 (H) × 582 (V) Effective Pixels NTSC: 976 (H) ×...
  • Page 68 Day/Night High-definition Dome Camera·User Manual Lens Mount φ14 Auto Iris DC drive Angle Adjustment Pan: 0 - 355° , Tilt: 0 - 80° , Rotation: ± 90° Day & Night IR cut filter with auto switch Horizontal Resolution 700 TVL Synchronization Internal/Power synchronization 1Vp-p composite output (75 Ω/BNC);...
  • Page 69 Day/Night High-definition Dome Camera·User Manual SMART IR, ATR, HLC, DNR, Sharpness, Video Brightness, Contrast, Hue, Gain, Mirror, Defect Pixel Correction General -10 ° C - 60 ° C (14 ° F - 140 ° F) Humidity 90% or less (non-condensing) Operating Conditions -H: -40 °...
  • Page 70 Day/Night High-definition Dome Camera·User Manual Dimension Unit: mm Dimension with DS-1240ZJ: Unit: mm...
  • Page 71 Day/Night High-definition Dome Camera·User Manual...

This manual is also suitable for:

Ds-2cc5181p-irDs-2cc5191p-irDs-2cc5181p-hDs-2cc5191p-hDs-2cc51a1p-vpDs-2cc51a1p-ir ... Show all

Table of Contents