Set Park Action; Set One-Touch Park - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

One The wiper wipes one time when you click
Time
Cycle The wiper works on schedule at set wiping interval. Click
wiping.
Duration
The schedule in which the wiper is ready to work.
Interval
The interval between two successive wiping actions.
Auto
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.

4.9 Set Park Action

You can set the device to perform an action (for example, preset or patrol) or return to a position
after a period of inactivity (park time).
Before You Start
Set the action type first. For example, if you want to select patrol as park action, you should set the
patrol. See Set Patrol Scan for details.
Steps
1. Go to Configuration → PTZ → Park Action .
2. Check Enable Park Action.
3. Set Park Time: the inactive time before the device starts park action.
4. Select Action Type according to your needs.
5. Select an Action Type ID, if you select patrol or preset as action type.
When the action type is patrol, action type ID stands for patrol No. When the action type is
preset, action type ID stands for preset No.
6. Click Save.

4.9.1 Set One-Touch Park

This function is used to start park instantly.
Steps
1. Refer to Set Park Action to set a park action.
2. Choose from the following methods to start one-touch park.
- Click .
TandemVu PTZ Camera User Manual
Note
on live view page.
50
on live view to start