Set Privacy Mask - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

- Call Preset No. 32.

4.10 Set Privacy Mask

Privacy masks cover certain areas on the live image to protect personal privacy from being live
viewed and recorded.
Steps
1. Go to Configuration → PTZ → Privacy Mask .
2. Select the PTZ channel.
1) Check Enable Privacy Masks.
2) Adjust the live image to the target scene via PTZ control buttons.
3) Draw the area.
Draw Area
Stop Drawing
4) Click Add.
It is listed in Privacy Mask List.
5) Edit Name, Type, and Active Zoom Ratio on your demand.
Active Zoom Ratio
When the actual zoom ratio is less than the set active zoom ratio, the set area can not be
covered. When the actual zoom ratio is greater than the set active zoom ratio, the privacy
mask is valid. The maximum value of active zoom ratio depends on the camera module.
6) Click Save.
7) Repeat the steps above to set other privacy masks.
3. Select panoramic channel.
1) Check Enable Privacy Masks.
2) Draw the area.
Draw Area
Stop Drawing
3) Click Add.
It will be listed in Privacy Mask List.
4) Edit Name, Type on your demand.
5) Click Save.
6) Repeat the steps above to set other privacy masks.
TandemVu PTZ Camera User Manual
Click Draw Area and drag the mouse in live
view image. You can drag the corners of the
red rectangle to adjust the area.
Click Stop Drawing after drawing area.
Click Draw Area and drag the mouse in live
image. You can drag the corners of the red
rectangle to adjust the area.
ClickStop Drawing after drawing area.
51