It represents the ratio of vehicle size to live image size during tracking. The larger the coefficient
is, the larger the vehicle is shown.
Uploading Picture Settings
Go to VCA → Set Application → ITS (Intelligent Transportation System) → Advanced Settings →
Picture to set the parameters of alarm pictures.
Picture Quality
Pictures with higher resolution and better quality have more details and larger file size.
Enable OSD Overlay
The device OSD is overlaid on alarm pictures.
Display Target Info. on Alarm Picture
Check to display target information on alarm pictures.
License Plate Exposure
You can adjust the exposure parameters to make sure that the license plates are exposed properly
during vehicle arming.
Steps
1. Go to VCA → Set Application → ITS (Intelligent Transportation System) → Advanced Settings →
License Plate Exposure .
2. Select a channel.
3. Check License Plate Exposure.
4. Set exposure parameters.
Reference Brightness
Adjust the reference brightness to the value that the license plate is exposed properly.
Min. Duration
The minimum duration to maintain the exposure level for the license plates when they are
detected.
Arming Schedule
Set the start time and end time when the license plate exposure settings are valid.
5. Click Save.
3.6 People Density
This function detects the level of people density in the detection areas.
TandemVu PTZ Camera User Manual
39