Table of Contents
Advertisement
The camera can be controlled by network and RS-485 signals. You can set the control priority of
these two signals.
The operation of Operator is prior to that of User. When the Operator is controlling the camera,
the User cannot control it. When the Operator finishes, the User can control the camera after
the Delay time. The Delay time can be set in Priority PTZ interface as shown follows.
2. Click
4.2.9 Configuring Panorama Tracking
Purpose:
After you enable this function, when the camera detects the moving object in the panoramic view, the
PTZ camera channel will track the detected target. PTZ camera channel automatically adjusts its PTZ
position to ensure that the target is in the center of PTZ view with certain detailed information. When
you need to perform the manual tracking, click the icon of live view interface and click the target to
start tracking.
Steps:
1. Enter the Panorama Tracking settings interface:
Configuration > PTZ > Panorama Tracking
User Manual of PanoVu Series Network Camera
Figure 4-19
to activate the settings.
Configure Panorama Tracking
Figure 4-20
PTZ Priority
58
Advertisement
Table of Contents
