Table of Contents
Advertisement
Steps
1. Go to Configuration → PTZ → Position Settings .
2. Set compass.
1) Adjust the tilt position of the device to 0 by controlling the up arrow and down arrow on the
PTZ panel.
2) Adjust the pan position to show the live view of the north direction by controlling the left
arrow and right arrow on the PTZ panel.
3) Click Set as North.
3. Click Gyroscope Attitude Calibration to calibrate gyroscope.
Note
Only the device with built-in gyroscope supports this function.
4. Get the device location information in advance, and input the longitude and latitude of the
device manually.
5. Set vandal-proof alarm.
The function enables the device to trigger alarms when its position changes because of shock or
vandalism.
Sensitivity
The higher the value is, the easier the alarm will be triggered.
Upload Vandal-proof Alarm
The device uploads the alarm information when the alarm is triggered.
Vandal-proof Alarm Voice Warning
The device triggers the alarm with audible warning.
6. Click Save.
What to do next
If you lost direction when operating the device, you can click Point to North to call the north
position that is saved in the device.
4.14 Panorama Tracking
This function links panoramic channel with PTZ channel through calibration. The PTZ channel tracks
moving objects in panoramic channel and automatically adjusts its PTZ positions to keep the target
in the center of PTZ view for more details.
Note
This function is only supported by certain device models.
TandemVu PTZ Camera User Manual
31
Advertisement
Table of Contents
