Table of Contents
Advertisement
7. Check Enable after successful calibration.
8. Click Save.
4.11 Panorama Tracking
This function links panoramic channel with PTZ channel through calibration. The PTZ channel tracks
moving objects in panoramic channel and automatically adjusts its PTZ positions to keep the target
in the center of PTZ view for more details.
4.11.1 Set Panorama Tracking – Auto Calibration
Before You Start
Avoid using auto calibration for vast similar scenes (for example, lake, lawn, or public square) or
dark scenes (for example, night scenes).
Steps
1. Go to Configuration → PTZ → Panorama Tracking → Calibration .
2. Select the Calibration Mode as Auto. Click Start Calibration.
3. Select a method for auto calibration.
One-touch
Calibration
Single Scene
Calibration
4. Click Save.
4.11.2 Set Panorama Tracking – Manual Calibration
Steps
1. Go to Configuration → PTZ → Panorama Tracking .
2. Select the Calibration Mode as Manual. Click Start Calibration.
3. Select a scene.
4. Add calibration points.
1) Select a No. in Calibration Parameter list. Click
Stitched PanoVu Camera with PTZ User Manual
If all scenes in panoramic channel have good stitching effect, it is
recommended to use One-touch Calibration to calibrate all scenes.
Click One-touch Calibration. When calibration for all scenes is complete, click
Stop Calibration to exit.
If certain scenes in panoramic channel have bad stitching effect, it is
recommended to use Single Scene Calibration to calibrate these scenes.
Select a scene. Use the PTZ control buttons to adjust the close-up view to the
same scene in the panorama view. Click Single Scene Calibration, and the
calibration for the selected scene starts.
When the calibration is complete, click Stop Calibration to exit. Select
another scene and repeat the calibration.
.
23
Advertisement
Table of Contents
