Set Alarm Server; Tcp Acceleration; Traffic Shaping; Data Monitoring - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

10.11 Set Alarm Server

The device can send alarms to destination IP address or host name through HTTP, HTTPS, or ISUP
protocol. The destination IP address or host name should support HTTP, HTTP, or ISUP data
transmission.
Steps
1. Go to Configuration → Network → Advanced Settings → Alarm Server .
2. Enter Destination IP or Host Name, URL, and Port.
3. Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data
transmission during communication.
4. Click Test to check if the IP or host is available.
5. Click Save.

10.12 TCP Acceleration

TCP acceleration is used to improve latency and reduce packet loss caused by network congestion
in poor network condition, and guarantee the fluency of live view.

10.13 Traffic Shaping

Traffic shaping is used to shape and smooth video data packet before transmission.
It helps to improve latency and reduce packet loss caused by network congestion and ensure the
video quality as well. Shaping level is configurable.

10.14 Data Monitoring

You can view and manage the SIM card data or wired network data used by the device. SIM card
data is the data service provided by network carriers; wired network data is usually provided
through a 4G router.
Steps
1. Go to Configuration → Network → Network Settings → Data Monitoring .
2. Check Enable.
3. Set the following parameters according to your data plan.
Plan Type
Daily, Monthly, or Annually can be selected.
TandemVu PTZ Camera User Manual
114