Panorama Tracking; Link Channels By Calibration - HIKVISION DS-2SE7C43C432MW-AEB User Manual

Steps
1. Go to Configuration → PTZ → Position Settings .
2. Manually set device direction by selecting the PT Mode as Manual.
1) Adjust the tilt position of the device to 0 by controling the up arrow and down arrow on the
PTZ panel.
2) Adjust the pan position to show the live view of the north direction by controling the left
arrow and right arrow on the PTZ panel.
3) Click Set as North.
3. Input the longitude and latitude of the device manually.
4. Click Save.
What to do next
If you lost direction when operating the device, you can click Point to North to call the north
position that is saved in the device.

4.14 Panorama Tracking

This function links panoramic channel with PTZ channel through calibration. The PTZ channel tracks
moving objects in panoramic channel and automatically adjusts its PTZ positions to keep the target
in the center of PTZ view for more details.

4.14.1 Link Channels by Calibration

Calibrate the panoramic channel and the PTZ channel to establish the link.
Steps
1. Go to Configuration → PTZ → Panorama Tracking .
2. Click Calibration.
3. Calibrate the channels automatically.
1) Select the Calibration Mode as Auto (Fast).
2) Adjust the PTZ positions of the two channels and make the centers of the two channels at
approximately the same position.
3) Click Start Calibration.
The device starts calibration automatically.
4. Optional: If automatic calibration fails, you can use the manual calibration.
1) Select the Calibration Mode as Manual.
2) Select a calibration point in Calibration Parameter list.
A numbered green cross is displayed on the panoramic image. You can drag the green cross to
adjust its position.
3) Click Add to save the cross position in the panoramic channel.
4) Adjust PTZ to place the green cross in the PTZ channel at the same position as the green cross
in the panoramic channel. 1× zoom ratio is recommended.
TandemVu PTZ Camera User Manual
25