HIKVISION DS-2SF8C442MXG-EL/26 User Manual page 27

Steps
1. Go to VCA → Face+Human → Rule .
2. Check Enable.
3. Select a configuration mode.
Normal One detection scene is allowed to set. The device captures targets in the scene in
the set arming schedule.
See for details.
Expert The device can patrol among the detection scenes and capture target images.
Detection scenes and patrol schedule should be set in advance.
See for details.
4. Click Save.
What to do next
Go to Picture to search and view the captured pictures.
Go to Smart Display to see currently captured target pictures.
Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and
picture.
Display VCA Info. on Stream
Display smart information on stream, including the target and rules information.
Display Target Info. on Alarm Picture
Overlay the alarm picture with target information.
Target Picture Settings
You can set the face picture type by selecting Custom, Head Shot, Half-Body Shot, or Full-Body
Shot. If you select Custom, you can define detailed picture width and height of a picture freely.
If the captured pictures should have the same picture height, check Fixed Value and input
desired picture height.
Face Beautification
Check Face Beautification and adjust the beautification level as needed.
Note
Face Beautification slightly adjusts skin tone and reduces facial noise.
Background Picture Settings
Comparing to target picture, background picture is the scene image offers extra environmental
information. You can set the background picture quality and resolution. If the background image
need to be uploaded to surveillance center, check Background Upload.
TandemVu PTZ Camera User Manual
15