HIKVISION DS-2SF8C442MXG-EL/26 User Manual page 38

Illegal lane change detection takes effect in the selected lanes or areas.
5. Set Sensitivity.
With higher sensitivity, the device is more sensitive to detect and recognize targets.
6. Click Save.
What to do next
Set the arming schedule, linkage and alarm. See Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
Set Vehicle on Non-motor Vehicle Lane Detection
The device detects vehicles driving on non-motor vehicle lane and captures evidence pictures.
Before You Start
Set detection scenes and detection areas. See Set Detection Scene and Set Lane Area for details.
Steps
1. Go to VCA → Intell Traffic Event → Common Settings → Speed Dome Rule Settings .
2. Select Enforcement.
3. Click Vehicle on Non-motor Vehicle Lane and check Enable.
4. Select Arm Lane.
Vehicle on non-motor vehicle lane takes effect in the selected lane areas.
5. Set the Amount of Pictures.
The device takes evidence pictures of the set amount when a vehicle hits the trigger line in the
detection area.
6. Set Duration.
When the vehicle stays in the detection area longer than the duration, an alarm is triggered.
7. Click Save.
What to do next
Set the arming schedule, linkage and alarm. See Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
Advanced Settings for Enforcement
Go to VCA → Intell Traffic Event → Advanced Configuration → Advanced to set the parameters.
Alarm Uploading
License Plate Thumbnail
When the license plate is recognized during enforcement, a license plate image is uploaded.
Upload Traffic Violation Data
Check to upload the alarm data when an enforcement event is triggered.
TandemVu PTZ Camera User Manual
26