Enforcement - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

9. Optional: Repeat the steps above to set multiple detection scenes.
10. Optional: Select a Scene to turn the live view image to the scene.
Set ITS Arming Schedule
The device automatically detects among multiple scenes according to the arming schedule.
Before You Start
Set multiple detection scenes. See Set Detection Scene for details.
Steps
1. Go to VCA → Intell Traffic Event → Common Settings → Speed Dome Arming Schedule .
2. Check Enable.
3. Draw a bar on the timeline to cover the arming hours.
4. Optional: Click on an arming period and adjust the arming hours.
- Enter the start time and end time and click Save to fine-tune the arming period.
- Click Delete to delete the arming period.
5. Click on an arming period, and click Configuration.
6. Set the Patrol Sequence and Dwell Time in each scene.
7. Click to copy the setting to another day.
8. Click Save.
9. Optional: Go to VCA → Intell Traffic Event → Advanced Configuration → Advanced to set PTZ
Camera Motion Parameters.
Enforcement Park Time
Manual control of the device takes priority over automatic patrols. When manual control is
over, the device waits for the set Enforcement Park Time before resuming automatic
detection.
Scene Auto-switch
If only Illegal Parking Detection is enabled in a scene, the device automatically switches to
the next scene when no evidence picture capturing is triggered for the set Auto-switch
Interval.

3.5.3 Enforcement

Enforcement includes detection of traffic violations and evidence picture capturing.
TandemVu PTZ Camera User Manual
Add a detection scene to the patrol sequence.
Adjust the order of the scenes.
Remove the detection scene from the patrol sequence.
20