Table of Contents
Advertisement
It describes the max. time occupation for one quick shot.
Capture Times
It refers to the capture times a face will be captured during its stay in the configured area. The
device captures the target face according to the set times.
Face Exposure
Enable the function, and the device automatically adjusts exposure level when human faces
appear in the scene.
Reference Brightness
It refers to the reference brightness of a face in the face exposure mode. If a face in the actual
scene is brighter than the set reference brightness, the device lowers the exposure level. If a
face in the actual scene is darker than the set reference, the device increases the exposure
level.
Minimum Duration
The extra time the device keeps the face exposure level after the face disappears in the scene.
Face Filtering Time
It means the time interval between the camera detecting a face and taking a capture action. If
the detected face stays in the scene for less than the set filtering time, capture will not be
triggered. For example, if the face filtering time is set as 5 seconds, the camera will capture the
detected face when the face keeps staying in the scene for 5 seconds.
Data Upload
Check one or more desired target types for picture uploading.
3.4 Person Arming
When the device detects the armed face or human body in the monitoring scene, it triggers
alarms, and tracks and captures the target. During the tracking, the target location and other
related information are uploaded.
Note
Select Person Arming on VCA Resource page to show the configuration page.
●
Target location information can be uploaded only when you set the GPS Calibration properly. See
●
GPS Calibration for instructions.
This function is only supported by certain device models.
●
Device Auto Person Arming and Manual Person Arming are supported. The Manual Person
Arming has a higher priority than the other, which means it can interrupt the ongoing auto person
arming.
TandemVu PTZ Camera User Manual
11
Advertisement
Table of Contents
