Table of Contents
Advertisement
Manual Person Arming The device tracks and captures the manually selected target and uploads
Device Auto Person
Arming
3.4.1 Device Auto Person Arming
You need to set face picture libraries and auto person arming rules to realize device auto person
arming.
Set Auto Person Arming Rule
Before You Start
The face picture library should be set in advance. See .
Steps
1. Go to VCA → Set Application → Person Arming → Basic Settings .
2. Check Enable.
3. Set the parameters for face picture comparison and arming.
1) Set the Face Grading Threshold for Detection and Max. Detection Time of Face.
Face Grading Threshold for Detection
Every face entering the monitoring scene is graded by the device according to the quality.
When a face with its grading exceeds the set threshold, it triggers the comparison with the
pictures in the selected face picture library.
Max. Detection Time of Face
If the grading of a target face does not reach the set Face Grading Threshold for Detection
during the set time, the device stops grading the target face.
2) Select a desired library, and set as the Face Picture Library.
3) Set the arming schedule and linkage method for the selected library.
Note
The arming schedule and linkage method for different libraries are allowed to set
independently.
4. Click Save.
Advanced Settings
In advanced parameters, you can set the tracking, capture and other parameters for the person
arming.
TandemVu PTZ Camera User Manual
the related data.
The device tracks and captures targets automatically according to the
setting rule.
12
Advertisement
Table of Contents
