Vehicle Arming - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

Note
If a list of license plates exists, the existing list is exported.
3. Fill in the list.
4. Click Browse to import the list.
The list shows on the web page.
5. Select a mode according to your need.
Normal Mode
Allowlist Mode Vehicles NOT on the list are armed.
Blocklist Mode
6. Click Save.
Set Alarm Output Linkage
The device sends alarm signals to the connected alarm output devices when an alarm is triggered.
Before You Start
The device is connected to alarm output devices.
Steps
1. Go to VCA → Intell Traffic Event → Advanced Configuration → Alarm Output Linkage .
2. Select alarm output channels for each type of alarms.
3. Click Save.
What to do next
See Trigger Alarm Output for detailed alarm output settings.

3.5.8 Vehicle Arming

The device detects and tracks designated license plates, and uploads real-time target location and
other related information.
Note
Select ITS (Intelligent Transportation System) on VCA Resource page to show the configuration
●
page.
Target location information can be uploaded only when the GPS calibration is completed. See
●
GPS Calibration for configuration instructions.
This function is only supported by certain device models.
●
Manual vehicle arming and platform-controlled vehicle arming are supported, and manual vehicle
arming has a higher priority.
TandemVu PTZ Camera User Manual
No vehicle is armed.
Only the vehicles on the list are armed.
36