Common Settings - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

Go to VCA → Intell Traffic Event → Common Settings → Basic Configuration to complete the
settings.
Basic Information
Select the Country/Region.
Listening Server
If the device uploads alarms in listening mode via our company's SDK, you should set the IP
address and port for the listening server.
ANR
When the network is disconnected, data is temporarily saved on the memory card. When the
network connection is resumed, the device automatically uploads the saved data to the arming
host, in which case, the arming host IP address is required.
Note
A memory card should be installed in the device. Memory card settings should be completed.
See Memory Card for instructions.

3.5.2 Common Settings

These are the commonly used settings for all types of ITS detections.
Set Lane Area
A lane area is where you want to set the detection rules. Mark the lane area according to the
actual lanes in the view.
Steps
1. Go to VCA → Intell Traffic Event → Common Settings → Speed Dome Rule Settings and click
Lane Area.
2. Click Add.
Blue lane lines and a trigger line show on the live view.
3. Drag the lane lines to frame the actual lane on the image.
Note
You can click Full Screen to enlarge the live view window. Press ESC on the keyboard to exit.
●
Lane lines cannot overlap.
●
4. Select the direction of the traffic and line type of the left and right lane lines according to the
actual situation.
5. Drag the trigger line to adjust its length and position.
The trigger line is where the device captures the vehicle pictures in some detections and where
traffic data collection is triggered.
6. Optional: Repeat the steps above to set multiple lane areas.
TandemVu PTZ Camera User Manual
18