Table of Contents
Advertisement
2.6.3 Restore to Default Communication Settings
When IR-712A (RevB) is powered on in OP mode, the default communication settings can be
restored temporarily by pushing the DIP switch to the "FW/Init" position for user's next custom
settings.
Figure 2-16 Push the DIP switch to "Init" mode when power is on.
IR-712A 序列埠(RS-232/RS-485)預設通訊參數如下：
Serial Port Parameters
Baud Rate
Parity
Data Bits
Stop Bits
Modbus/DCON Net ID
IR-712A User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Table 2-2 Default Communication Settings of IR-712A
Default Settings
115200 bps
NONE
8
1
1
Version 1.9
E-mail: service@icpdas.com
17
Page：
Advertisement
Table of Contents
