Restore Factory Defaults, Firmware Update & Reboot; Restore All Options To Their Factory Default States - ICP DAS USA tET Series User Manual

Ethernet I/O Modules
4.3.3 Restore Factory Defaults, Firmware Update & Reboot

Restore all options to their factory default states

To restore all parameters of the module to their factory presets, follow the steps:
Step 1: Click the "Restore Defaults" button to reset the configuration.
Step 2: Click the "OK" button in the message dialog box.
Step 3: Check whether the module has been reset to factory presets by using eSearch Utility.
Refer to Section 3.4 "Using the eSearch Utility to assign a new IP".
1.
2.
Factory presets
3.
ICP DAS CO., LTD. tET/tPET IO Series User Manual, Ver. 2.4, Sep. 2023, P37