Sub-Fc 40 (0X28): Set The Preset Power-On Values - ICP DAS USA IR-310-RM User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

5.4.14 Sub-FC 40 (0x28): Set the preset power-on values

‧Request
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Power-on
value byte0
04 Power-on
value byte1
05 Reserved
06 Reserved
07 Sequential
action
‧Response
Byte order Description
00 Address
01 FC
02 Sub-FC
03 Setting result
Note:
1. For "Power-on value byte0 and byte1", byte0 represents the state of RL0~RL7 and
the least two bits of byte 1 are the state of RL8 and RL9.
The binary representation of the byte1 and byte 0 is 0000 00## #### #### where the
least significant bit# (the rightest) is RL0 and the most significant bit# is RL9.
Bit# = 1 => Relay# is ON (at NO contact)
Bit# = 0 => Relay# is OFF (at NC contact)
2. Sequential action" is only effective in sequential mode.
IR-310-RM, IR Controlled 10-ch High Power Relay Module (Ver. 1.1, Jul/02/2013) 47
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x28
1 Byte 0x00~0xFF. Bit 0 ~ bit 7 => RL0 ~ RL7
Bit# = 1 / 0 means RL# ON / OFF.
1 Byte 0x00~0x03. Bit 0 & bit 1 => RL8 & RL9
Bit# = 1 / 0 means RL# ON / OFF.
1 Byte 0x00
1 Byte 0x00
1 Byte 0=>stop, 1=>forward
Size Value
1 Byte 1 ~ 247
1 Byte 0x64
1 Byte 0x28
1 Byte 0x00 => OK, 0xFF=>Error.