Status Led Indicators; Pin Assignments - ICP DAS USA ECAT-2050 Quick Start Manual

3

Status LED Indicators

Notation Color
PWR Red
RUN Red
Link
Activity Green
IN/OUT
D/I Green
D/O Green
4

Pin Assignments

ICP DAS, ECAT-2050 DIO Quick Start, Rev. 1.00
Description
States
On The device is powered up
Off The device is in state INIT
The indicator shall turn on and off
Blinking iso-phase with a frequency of 2.5 Hz: on
for 200 ms followed by off for 200 ms.
The indicator shall show one short flash
Single Flash (200 ms) followed by a long off phase
(1000 ms).
On The device is in state OPERARIONAL
Off No link
Blinking Link and activity
On Link without activity
Input voltage is lower than +2 V
Off
(Max.)
On Input voltage is higher than "Off" state
Off Digital output status is "Off"
On Digital output status is "On"
DC
Page 6