On the logic analyzer, press the Run key. The display should be similar to the figure
6
below.
On the pulse generator, enable Channel 1 and Channel 2 COMP (with the LED on).
7
On the logic analyzer, press the Run key. The display should be similar to the figure
8
below. Record Pass or Fail in the performance test record.
Test the next channels
•
Return to "Connect the logic analyzer" on page 3–19 and connect and test the next
combination of data and clock channels until all pods are tested.
To access pods 2, 4, 6, or 8 in the Format menu, select pods 1, 3, 5, or 7 fields, then select the
other pod in the pop-up menu. Use the knob to access pods that are not shown on the screen.
Testing Performance
To test the glitch capture (logic analyzer)
3–23