Table of Contents
Advertisement
Testing Performance
To test the glitch capture (logic analyzer)
Set up the Trigger menu.
3
a Press the Trigger key.
b Select Modify Trigger, then select Clear Trigger, then select All.
Using the [Shift] + width: channel 1 and [Shift] + width: channel 2 of the
4
oscilloscope, verify that the pulse widths of the pulse generator channels 1 and 2 are
3.450 ns, +50 ps or −100 ps. If necessary, adjust the pulse widths of the pulse
generator channels 1 and 2.
Set up the Waveform menu to view all the channels.
5
a Select one of the Glitch labels, then select Delete All in the pop-up menu.
b Select All, then select continue.
c Press the Select key, then select Insert in the pop-up menu.
d Press the Select key, then select Sequential in the pop-up menu.
3–22
Advertisement
Table of Contents
