HP 1660C-Series, HP 1660CS-Series, and
HP 1660CP-Series Logic Analyzers
The HP 1660C-Series are 100-MHz State/500 MHz Timing Logic Analyzers.
The HP 1660CS-Series includes all the features of the HP 1660C-Series, as well as a
2-channel, 1 GSa/s oscilloscope.
The HP 1660CP-Series includes all the features of the HP 1660C-Series, as well as a
32-channel pattern generator.
Features
Some of the main features of the HP 1660C-Series Logic Analyzers are as follows:
•
128 data channels and 6 clock/data channels in the HP 1660C
•
96 data channels and 6 clock/data channels in the HP 1661C
•
64 data channels and 4 clock/data channels in the HP 1662C
•
32 data channels and 2 clock/data channels in the HP 1663C
•
3.5-inch flexible disk drive
•
540 MB hard disk drive
•
HP-IB, RS-232-C, and Centronics printer interfaces
•
Variable setup/hold time
•
4k states deep memory on all channels with 8k states in half channel mode
•
Marker measurements
•
12 levels of trigger sequencing for state and 10 levels of sequential triggering for
timing
•
100 MHz time and number-of-states tagging
•
Full programmability
•
DIN mouse
•
DIN keyboard support
The HP 1660CP-Series Logic Analyzers also include the following features:
•
32 channels of stimulus
•
Maximum output rate of 200 MHz in half-channel mode and 100 MHz in
full-channel mode
•
Memory depth of 258,048 vectors
•
Support for TTL, 3-state TTL/3.3v, 3-state TTL/CMOS, ECL terminated, ECL
unterminated, and differential ECL (without pod).
ii