Sliding Out the System Board Tray
The slide-out system board tray allows you to quickly remove
the system board, without using tools.
!
1. If you have locked the Smart Cover Lock, use Computer
2. Shut down the operating system properly, then turn off the
3. Disconnect the power cord from the power outlet.
4. Remove the computer cover.
5. Raise the expansion card cage into service position 2. You
6. Grasp the back edge of the system board tray and slide it
Sliding Out the System Board Tray
WARNING:
Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
Setup to unlock the lock and disable the Smart Cover
Sensor.
computer and any external devices.
do not need to remove the cage from the chassis.
straight out of the chassis.
Making Hardware Changes
4-7