Omron R88D-KN ML2 Sries User Manual page 3

Introduction
Thank you for purchasing the OMNUC G5 Series. This user's manual explains how to install and
wire the OMNUC G5 Series, set parameters needed to operate the G5 Series, and remedies to be
taken and inspection methods to be used should problems occur.
Intended Readers
This manual is intended for the following individuals.
Those having electrical knowledge (certified electricians or individuals having equivalent or more
knowledge) and also being qualified for one of the following:
 Those in charge of introducing FA equipment
 Those designing FA systems
 Those managing FA sites
Notes
This manual contains the information you need to know to correctly use the OMNUC G5 Series and
peripheral equipment.
Before using the OMNUC G5 Series, read through this manual and gain a full understanding of the
information provided herein.
After you finished reading the manual, keep it in a convenient place so that the manual can be
referenced at any time.
Make sure this manual will also be delivered to the end-user.
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
Introduction
1