Table of Contents
Advertisement
Configure Connect IT using the web user interface
Update modem firmware
You can update the modem firmware on the Connect IT. Before you begin, you must download the
desired version of the modem firmware onto your PC.
1.
Download the Connect IT firmware to your
2.
Log in to the Connect IT web
3. Select the System tab in the left pane.
4. Scroll down to the Modem Firmware section.
5. Click Choose File.
6. Browse for and select the modem firmware file downloaded to your PC.
7. Click Upload & Install Firmware.
Configure a serial port
You can configure the connection, determine if changes are monitored, and enable a TCP, Telnet, or
SSH connection for each serial port. Each port must be individually configured.
Configure the connection settings for a serial port
You can configure the serial ports on the Connect IT. Each port must be configured individually.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Serial section.
4. Expand the port that you want to configure.
5. Configure the settings.
Setting
Enable
Serial mode
Label
Baud rate
Digi Connect IT® 4 User Guide
PC.
UI.
UI.
Description
Select the Enable option to enable this port for use. If it is not
selected, the port won't work.
Select an access mode for this serial port.
Login: Select this option to display the Login Manger
n
screen when you access the web UI.
Remote access: Select this option to allow OOB
n
management. This is the default.
The name of the serial port. If left blank, the default label is
used.
An entry is optional.
The baud rate for the serial port. This value must match the
baud rate configuration for the equipment connected to the
Connect IT.
The default is 9600.
Update modem firmware
34
Advertisement
Table of Contents
