Define A Custom Apn; Configure An Ip Passthrough For The Modem - Digi Connect IT 4 User Manual

Configure Connect IT using the web user interface
Setting
SIM failover alternative
APN list only
5. Click Save.

Define a custom APN

You can define a list of custom APNs to try when connecting to the cellular network.
1. Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the APN list section.
4. Expand the Modem section.
5. In the Add APN field, enter the custom APN.
6. Click Add.
7. If the custom APN requires a specific user name and password, enter them in the Username
and Password fields.
8. Click Save.
Configure an IP passthrough for the modem
You can configure an IP passthrough. This is used to assign the address obtained from the cellular
network to an external device using DHCP, rather than assigning it to the modem device in this
Connect IT.
1. Log in to the Connect IT web
2. Click Configuration in the left pane.
Digi Connect IT® 4 User Guide
Description
The action to perform when the connection retries have
been exceeded but no other SIM is available to switch to.
None: Perform no alternative action.
n
Reset modem: Reset the modem if the SIM failover
n
feature is not enabled and thus automatic SIM
switching is not available.
Reboot device: Reboot the device if the SIM failover
n
feature is not enabled and thus automatic SIM
switching is not available.
Determine which APN should be used.
Enabled: When enabled, the APN list is used
n
exclusively.
Disabled: When disabled, configured APNs are tried
n
before the APNs built into the firmware are tried.
UI.
UI.
Configure the modem in the Connect IT
42