Change A Connect It Password From The Web Ui; Configure The User Groups From The Web Ui - Digi Connect IT 4 User Manual

Configure Connect IT using the web user
interface

Change a Connect IT password from the web UI

You can change either the root password for the web UI on the Connect IT or the password a user
would use to log onto the web UI.
1. Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Authentication section.
4. Expand the Users section.
5. Determine for whom you want to change the password.
Expand the root section to change the root password for the Connect IT.
n
Expand a section with a user name to change the password that user would use when
n
logging on to the web UI on the Connect IT.
6. In the Password field, enter a new password.
7. Select the Show option if you want the password to display in the field. If you don't select this
option, a series of dots displays.
8. Click Save at the bottom of the screen to save the changes. The next time the user logs in to
the web UI, they will need to use the new password.

Configure the user groups from the web UI

You can configure the user groups with access to the desired serial ports and processes.
Two groups are available by default: admin and serial:
admin: Users in this group have full access to all of the features on the Connect IT.
n
serial: Users in this group have access to all serial ports by default.
n
When you add a new
1. Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Authentication section.
4. Expand the Groups section.
Digi Connect IT® 4 User Guide
Manage users, groups, password, and two-factor authentication
UI.
user, you can allow access to the desired features.
UI.
from the web UI
30