Alarms; Modem Emulation - Digi LTS 32 User Manual

Alarms

ConnectPort LTS products can be configured to issue alarms, in the form of email message or
SNMP traps, when certain device events occur. These events include certain data patterns being
detected in the data stream. Receiving alarms about these conditions provides the advantage of
notifications being issued when events occur, rather than having to monitor the device on an
ongoing basis to determine whether these events have occurred. For more information on
configuring alarms, see "Alarms.‖

Modem emulation

ConnectPort LTS products include a configuration profile that allows the device to emulate a
modem. Modem emulation sends and receives modem responses to a serial device over TCP/IP
(including Ethernet) instead of Public Switched Telephone Network (PSTN). The modem emulation
profile allows maintaining a current software application but using it over the less expensive
Ethernet network. In addition, Telnet processing can be enabled or disabled on the incoming and
outgoing modem-emulation connections.
23