Set Modem - Digi ConnectPort LTS8 Command Reference Manual

Command descriptions

set modem

Purpose
Used to configure options of modem profile for a serial port, or display current modem profile settings
for a serial port.
Required permissions
Permissions must be set to one of the following:
For a user to display the modem settings: "set permissions s-modem=read"
n
For a user to display and set the modem settings: "set permissions s-modem=rw"
n
Syntax
Configure modem settings
set modem [port={1-32|internalmodem}]
[state={off|on}]
[connection_type={incoming|outgoing|
network_bridge}]
[ppp_connection ={off|on}]
[init_string= string ]
Options
port={1-32|internalmodem}
Used to specify the serial port. Optional on a single-port device. To configure settings for an internal
modem port, specify "port=internalmodem".
state={on|off}
Specifies whether the modem will be enabled
on
Enable the modem for a serial port.
off
Disable the modem for a serial port.
connection_type={incoming|outgoing|network_bridge}
Specifies the connection type of a modem profile.
incoming
Used for dial-in connections, such as inbound PPP connections or to manage a device
through a telephone network. The ConnectPort LTS product server will receive
connections from other hosts.
outgoing
ConnectPort® LTS Command Reference
set modem
68