Digi Connect IT 4 User Manual page 40

Configure Connect IT using the web user interface
Setting
Match SIM by
Match SIM slot
Match SIM carrier
Match PLMN identifier
Digi Connect IT® 4 User Guide
Configure the modem in the Connect IT
Description
The match criteria to apply when determining if this
interface should be used.
Any SIM: Apply this interface to the modem with any
n
SIM.
SIM slot: Apply this interface when a specified
n
SIM slot is active. An entry in the Match SIM slot field
is required.
Carrier: Apply this interface with SIM cards from a
n
particular cellular carrier. An entry in the Match SIM
carrier field is required.
PLMN identifier: Apply this interface with SIM cards
n
that have a specific PLMN identifier. An entry in the
Match PLMN identifier field is required.
IMSI: Apply this interface with SIM cards that have a
n
specific IMSI. An entry in the Match IMSI field is
required.
ICCID: Apply this interface with SIM cards that have a
n
specific ICCID. An entry in the Match ICCID field is
required.
This conditional field displays when the SIM slot option is
selected from the Match SIM by list box.
Enter the SIM slot match criteria. The interface is applied
when the modem is using this SIM slot. Modems with a single
SIM slot will always match SIM1.
The default value is SIM1.
This conditional field displays when the Carrier option is
selected from the Match SIM by list box.
Select the appropriate SIM carrier from the list box. The
interface is applied when the SIM card is provisioned from
the carrier.
The default value is AT&T.
This conditional field displays when the PLMN identifier
option is selected from the Match SIM by list box.
Enter the SIM PLMN (Public Land Mobile Network) match
criteria. The interface is applied when the SIM card is
provisioned from the carrier with this PLMN carrier. The
PLMN identifier consists of the Mobile Country Code (MCC)
followed by the Mobile Network Code (MNC).
40