Update The Firmware On Connect It From Remote Manager - Digi Connect IT 4 User Manual

Configure Connect IT using Remote Manager
4. For each device you want to add:
a. From the drop-down menu, select the device identifier type to use for the device:
Note
add the device.
b. Type in the device identifier.
c. In the Install Code field, enter the installation code found on the device label. If you
d. Click Add. The device is added to the device list box.
e. Repeat this process to add additional devices.
5. When you have finished entering devices, review the listed devices. If necessary, use Remove
to remove any incorrect
6. Click OK to add all the listed devices to your Remote Manager inventory.
7. After a few minutes, click the refresh icon in the toolbar to refresh the device list. The new
devices appear in your device inventory.
8. Information about the added device is saved in the event log. Click Admin > Event Log to
display the

Update the firmware on Connect IT from Remote Manager

You can update the firmware on Connect IT from Remote Manager. You must first get the current
firmware file, and then you can upload it to the device.
1. Download the Connect IT firmware to your
2. Log in to your Remote Manager account.
3. Click Device Management.
4. From the list of devices, click on the Connect IT for which you want to update the firmware.
5. In the toolbar, click More > Update Firmware. The Update Firmware dialog appears.
6. Click Browse to select the firmware file you just downloaded.
7. Click Update Firmware to immediately update the firmware.
Note By default, the firmware will update when you click the Update Firmware button. If you
want to schedule when you want the update to occur, click the gear icon to display the options.
See Schedule an action
the schedule options.
Digi Connect IT® 4 User Guide
MAC address, IMEI #, or Device ID. Typically, you can find the MAC address or IMEI
number on the device label.
If a device has both a MAC address and an IMEI #, you must use the MAC address to
attempt to add a device that requires an installation code with a missing or
incorrect code, you receive an error message. For devices that were not
manufactured with an associated installation code, the installation code is optional.
entries.
Event log view.
in the Digi Remote Manager User Guide
Update the firmware on Connect IT from Remote Manager
PC.
for detailed information about
18