Digi Connect IT 4 User Manual page 29

Configure Connect IT using the web user
interface
5. Expand the group that you want to configure.
6. Configure the group as desired.
Setting
Admin access
Shell access
Serial access
Serial ports
OpenVPN access
OpenVPN
Nagios access
7. Click Save at the bottom of the screen to save the changes.
Digi Connect IT® 4 User Guide
Manage users, groups, password, and two-factor authentication
Description
When selected, allows members assigned to this group to
manage the Connect IT.
Note Members will have full access to the Connect IT.
When selected, allows members of this group access a
shell process on this Connect IT.
Note Members will have full access to the Connect IT.
When selected, allows members of this group access to
the set of ports listed in the Serial ports section.
A list of ports to which members of this group may access.
The Serial access option must be selected for the users in
this group to have access to the ports.
a. Click Add. A new port row is added.
b. From the Port list box, select the appropriate
port.
When selected, allows members of this group access the
specified OpenVPN tunnels listed in the OpenVPN section.
A list of OpenVPN tunnels to which members of this group
may access.
The OpenVPN access option must be selected for the
users in this group to have access to the tunnels. You must
have previously added at least one OpenVPN
a. Click Add. A new tunnel row is added.
b. From the Tunnel list box, select the
appropriate tunnel.
When selected, allows members of this group to query the
device for service status for Nagios.
from the web UI
tunnel.
29