Table of Contents
Advertisement
Configure Connect IT using the web user interface
Section
Telnet
DNS
Remote control
SNMP
Multicast
5. Click Save at the bottom of the screen to save the changes.
Monitor the data from the Connect IT
You can configure the network for the Connect IT.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Monitoring section.
4. Each sub-section enables you to configure a different monitoring method. Expand the sub-
section and complete the fields in each of the sections. To display information about what you
should enter in each field, click the down arrow and then Help next to each field.
Section
NetFlow probe
Device Health
intelliFlow
5. Click Save at the bottom of the screen to save the changes.
Digi Connect IT® 4 User Guide
Description
The Telnet service provides a Telnet server for managing
the Connect IT.
Note
Telnet is an insecure protocol. It should only be used
for compatibility reasons, and only if steps have been
taken to ensure the network connection is secure.
The DNS service provides a caching DNS server. This
server forwards queries to the DNS servers that are
associated with the network interfaces, and caches the
results.
Note
This server is used within the Connect IT, and cannot
be disabled. Use the access control list to restrict external
access to this server.
Not available.
The SNMP service provides an SNMP agent for using
SNMP management on this Connect IT.
The multicast service provides a multicast route.
UI.
Description
Probe network traffic on this device and export statistics
to NetFlow collectors.
Device Health is a system monitor that collects and stores
metrics over a period to time and reports them to Digi
Remote Manager.
Reserved for future use.
Monitor the data from the Connect IT
52
Advertisement
Table of Contents
