System Operation With A Navigator - Extron electronics NAV 10SD 101 User Manual

System operation with a NAVigator

Your NAV system must include an Extron NAVigator, a system manager that configures and
controls the AV streaming system. The NAVigator allows you to make changes to multiple
endpoints in the system from a central location, simplifying operations such as making ties
or bulk configuration.
The base version of the NAVigator can support up to 16 endpoints by default, but if a
LinkLicense is installed, support can be expanded to up to 240 endpoints, depending on
the LinkLicense.
See the NAVigator User Guide, available at www.extron.com for details.
Configuration and other operations
Configuration and more complex operation of the system is accomplished via embedded
web pages (see HTML Operation, beginning on page 18) or Extron Toolbelt. Simple
Instruction Set (SIS) commands (see SIS Operation, starting on page 71) cannot be issued
directly to the decoder, but are issued via an Extron control system on the AV network
using a process known as "encapsulation" (see the NAVigator User Guide, available at
www.extron.com for details).
NAV 10SD 501 and NAV 10SD 101 Scaling Decoders • Installation 15