Extron electronics NAV 10SD 101 User Manual page 62

Date & Time page
The Date & Time selection on the General Settings page (see
opens a read-only pane showing date and time settings (see figure 51). Click SET MANUALLY
( 1 ) and SYNC WITH SERVER (
The date and time can be edited by clicking the EDIT button (
(see "Set time manually" and figure 51 and
NOTE: Editing of these settings is disabled and the EDIT button is unavailable for
selection when the decoder is assigned to a NAVigator.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Set Time Manually
Figure 51. Date & Time Selection
Set time manually —
1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3
Figure 52. Set Time Manually
1 Set from PC — Click this link to sync the decoder date and time to the computer with
which you are connected.
2
Date & Time — Click in this field and type in the date and time.
3 Time Zone — Click the drop-down list to select the offset from Greenwich Mean Time
(GMT).
NAV 10SD 501 and NAV 10SD 101 Scaling Decoders • HTML Operation
2 ) to switch between the views applicable to each selection.
Sync time with server
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
figure 48 on page 51)
3 ). An editable pane opens
figure 54
and on page 55).
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Sync
54