Video Pane - Extron electronics NAV 10SD 101 User Manual

The Output Configuration page (see
Video ( 3 ), Audio ( 4 ), Test Pattern (
(OSD) ( 7 ) that display the status of the output signal.
Each pane has settings that can be changed by clicking the EDIT button (
appropriate pane. The selected dialog box opens (see "Video pane,"
page 26, Test Pattern pane
Screen Display (OSD) pane

Video pane

See figure 16. If you change any of the settings in the Video dialog box (
the SAVE button ( 5 ) becomes selectable. Click SAVE to take changes or CANCEL (
abandon them. Clicking either button closes the dialog box.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
Figure 16. Video Output Configuration Dialog Box
1 HDCP Mode — Click the drop-down list to select between
the following two output modes for the HDMI Output port (see
B
on page 7).
• Follow Input — The decoder follows the streamed
HDCP encryption status.
Always Encrypt — The decoder outputs HDCP encryption regardless of the
•
content.
NOTE:
Follow Input
maintains the HDCP encrypted state with the output sink device to
Alway Encrypt
improve system switching performance.
2 Video Output — Click the drop-down list to select among the
various output formats and colorspace for the HDMI Output
port ( B ). The table below shows the available formats.
Format
Auto (based on the EDID of the sink
[default])
DVI RGB 444
HDMI RGB 444 Full
HDMI RGB 444 Limited
NAV 10SD 501 and NAV 10SD 101 Scaling Decoders • HTML Operation
figure 15 on page 24) consists of five panes,
5 ), Screen Saver (
on page 27, Screen Saver pane
on page 30).
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
mimics the HDCP encryption state of the connected source.
Format
HDMI YUV 444 Full
HDMI YUV 444 Limited
HDMI YUV 422 Full
HDMI YUV 422 Limited
6 ), and On Screen Display
8
) in the
Audio pane on
on page 27, and On
1 4
through ),
6 ) to
25