System Operation With A Navigator - Extron electronics NAV SD 501 User Manual

Streaming hdmi scaling decoders

Hide thumbs Also See for NAV SD 501:

Table of Contents

System operation with a NAVigator

Your NAV system must include an Extron NAVigator, a system manager that configures and

controls the AV streaming system. The NAVigator allows you to make changes to multiple

endpoints in the system from a central location, simplifying operations such as making ties

or bulk configuration.

The base version of the NAVigator can support up to 16 endpoints by default, but if a

LinkLicense is installed, support can be expanded to up to 240 endpoints, depending on

the LinkLicense.

See the NAVigator User Guide, available at

https://www.extron.com

for details.

Configuration and other operations

Configuration and more complex operation of the system is accomplished via embedded

web pages (see

HTML

Operation, beginning on page 17) or Extron Toolbelt. Simple

Instruction Set (SIS) commands (see

SIS

Operation, starting on page 63) cannot be issued

directly to the decoder, but are issued via an Extron control system on the AV network

using a process known as "encapsulation" (see the NAVigator User Guide, available at

https://www.extron.com

for details).

NAV SD 501 and NAV SD 101 Scaling Decoders • Installation

Table of Contents

Nav sd 101