Extron electronics NAV 10SD 101 User Manual page 60

Device Details page
The Device Details selection on the General Settings page opens a read-only pane
that shows general information unique to the decoder (see figure 49). The Device Name,
Output Number, and Location can be edited by clicking the EDIT button (
version of the selection opens (see
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 49.
NOTES:
Editing of Device Detail settings is disabled and the EDIT button is unavailable for selection when the
•
decoder is assigned to a NAVigator.
• Special characters, which are not allowed in tags, names, and locations, are as follows:
! ~ ` @ # $ % ^ & * ( ) _ + = { } [ ] |\ : ; " ' < > , . ? and / . A hyphen (–) is not a special character.
•
Tags, names, and locations each have a 63-character limit.
Tag Rules
•
Cannot begin or end with a
hyphen.
•
Cannot begin with a space.
•
Spaces are allowed after the
first character.
•
Multiple tags are allowed, making
filtering and sorting searching
easier.
The read-only Features datum (
•
(NAV 10SD 501) or Base (NAV 10SD 101).
figure 50
Device Details Selection
Name Rules
•
Must begin with a letter.
•
Cannot end with a hyphen.
•
Spaces are not allowed.
) indicates the configuration of the decoder: USB & Eth Extension
A
NAV 10SD 501 and NAV 10SD 101 Scaling Decoders • HTML Operation
on page 53).
A A A A A A A A A A A A A A A A A A
Location Rules
•
Must begin with a letter.
•
Cannot end with a hyphen.
•
Hyphens are allowed in any other position.
•
Cannot begin with a space.
•
Spaces are allowed after the first character.
1 ). An editable
52