Platform Worklights; Skypower® 7.5 Kw And Generator 4 Kw - JLG RT3394 Operation & Safety Manual

3. Reverse the direction of the selected function.
Note: The machine will move in creep mode until proximity switch is no longer
triggered.
4. Continue normal operation.
Ground Mode
If a proximity switch is triggered by a nearby obstruction, the horn sounds and all
motion immediately stops. In order to continue normal operation:
1. Release selected function, then reverse the direction.
2. Re-engage the selected function.
Note: The machine will move in creep mode until proximity switch is no longer
triggered.
5.6

PLATFORM WORKLIGHTS

The Platform Worklights accessory consists of two 12V lights mounted to the platform
railings.
5.7 SKYPOWER® 7.5 KW AND GENERATOR 4 KW
The SkyPower and generator system supplies AC power from a generator in the engine
compartment to an AC receptacle in the platform.
All power regulation components are located in a watertight box connected by cable to
the generator. The generator supplies power when running at the specified speed with
the power switch on (switch is located on platform). A two-pole, 20 Amp (4 kW) or
three-pole, 30 Amp (7.5kW) circuit breaker protects the generator from overload.
RT3394, RT4394 31221544
Accessories
79