Figure 43: Inputs/Outputs & Temperature Compensation Tab Screens In Supervisor Mode - Fluke TIP900 Operating Instructions Manual

Operation
Global error min. default:
Global error max. default:
Inputs/Outputs Tab
Figure 43: Inputs/Outputs & Temperature Compensation tab screens in Supervisor mode
-- Inputs/Outputs: Wago 750 Fieldbus Coupler Input Settings --
IP address:
MAC address:
-- Inputs/Outputs: Wago 750 Fieldbus Coupler Output Settings --
IP address:
MAC address:
50
-- Global error min.-max. default --
The default minimum allowed global error value. This value
will be used in all new recipes.
The default maximum allowed global error value. This value
will be used in all new recipes.
The IP address for the Wago 750 Fieldbus Coupler for inputs
will be assigned via BootP in the network. The default IP
address is "192.168.42.31".
The unique MAC address of the Wago 750 Fieldbus Coupler
for inputs, which should be served via BootP and addressed
via the IP address above.
The IP address for the Wago 750 Fieldbus Coupler for outputs
will be assigned via BootP in the network. The default IP
address is "192.168.42.32".
The unique MAC address of the Wago 750 Fieldbus Coupler
for outputs, which should be served via BootP and addressed
via the IP address above.
Rev. E1 Feb 2016
Temperature Compensation Tab
TIP900