The "Login Supervisor" And The "Logout Supervisor" Selectors; The "About" Selector In The Menu Bar; Figure 60: Login Mask For Supervisor Login - Fluke TIP900 Operating Instructions Manual

Wallboard temperature imaging & profiling system

Table of Contents

Operation

5.2.1.1.7 The "Login Supervisor" and the "Logout Supervisor" selectors

In standard operation, the supervisor is logged out and the normal operator works with assigned

access rights in a restricted environment.

By selecting the Login Supervisor button, the TIP900 program opens a login sub-window and prompts

you to enter a supervisor password, to get the needed privileges.

During the very first TIP900 program installation, there is no specific supervisor password preset. It is

empty and needs to be set by the supervisor in the configuration menu, see chapter 5.2.1.1.4.

The

selection just returns from supervisor mode into normal operator mode. All

previously assigned supervisor privileges will be withdrawn by the program.

The selection of the About button opens a small sub-window, where a "Help" or "Info" selection is

possible.

The selection of Help opens the TIP900 help documentation and enables a detailed view and search

capability.

The selection of Info opens the TIP900 information screen, which displays the program developer, the

program name, the program version number and license and warranty conditions.

TIP900

Rev. E1 Feb 2016

Table of Contents