Figure 46: Maintenance Of Mp150 Scanner In Supervisor Mode - Fluke TIP900 Operating Instructions Manual

Operation

Figure 46: Maintenance of MP150 Scanner in Supervisor mode

Scanner Window:
1
Change Scanner Window: Artificial change of the glass window transmissivity in the scanner
1.1
Scroll Control:
1.2
Alignment Laser:
2
54
Maintenance Information for the MP150 Scanner
1.1
2
1.2
Shows the scanned lines of MP150 scanner regarding the current
settings in system configuration. Resolution per line and the line scan
frequency are taken over to display the current thermal image. If the
scanner is not accessible, the scanner Ethernet status changes from
green to red background color. The displayed "Ambient Temperature"
is the measured scanner ambient temperature inside the Protective
Housing for the scanner device. Don't mismatch such temperature with
the real ambient temperature in the gypsum wallboards surrounding
area.
housing. Such proceeding simulates a more or less dust contaminated
front glass window in the scanner.
Regarding the configured scan resolution and scan frequency, the
displayed image is scrolled from the top to the bottom.
Herewith you are able to switch the scanner Alignment Laser on/off.
If doing this, be aware that nobody stares into the laser beam.
Rev. E1 Feb 2016
1
TIP900