Table of Contents
Advertisement
5.2.1.1.3 The "Edit Recipe" selector in the menu bar
The Edit Recipe selector button is just available in the Supervisor mode and allows the creation of new
recipes, the edit/configuration of existing recipes and the assignment of reference board maps to specific
dryer decks.
Please see under chapter 5.2.1.1.2 in red marked boxes to
which are settable by the Supervisor.
4
8
Figure 41: Edit Recipe selection screen in Supervisor mode
The following selections by pressing or clicking onto the blue marked buttons can be made by the
Supervisor:
New Recipe:
4
Open Recipe:
5
Save Recipe:
6
TIP900
5
9
10
11
2
3
This selection creates a new recipe by the Supervisor. All under
chapter 5.2.1.1.2 possible entries have to be set or altered. The New
Recipe button already presets default values for the new recipe, which
have to be verified by the Supervisor and adapted. After all entries have
to be adapted and verified, the new recipe has to be saved under a
new recipe name.
This selection opens an existing recipe, which can be selected out of a
recipe/profile list. The Supervisor has all rights to modify each entry of
the opened recipe.
The Save Recipe button just stores the currently modified recipe. Every
recipe modification and storage action will be logged by the TIP900 SW
and is displayed in the General Info (Application Log) window element.
Rev. E1 Feb 2016
3
1
6
1
12
Operation
all parameter descriptions,
7
2
45
Advertisement
Table of Contents
