Table of Contents
Advertisement
5.2.1.1.4 The "Configuration" selector in the menu bar
The Configuration selector button is always visible, but the entries are modifiable just in Supervisor
mode. If you're in supervisor mode, the process control will be interrupted after the configuration push
button is activated.
Under four (4) separate screen tabs you will find the different configuration categories, which are listed
below.
Application Tab(1)
Figure 42: Application configuration tab screens in Supervisor mode
Incoming directory:
Recipes directory:
Log directory:
Supervisor Password:
MAC Address TIP900 PC:
TIP900
-- Main Settings --
This is the standard directory to monitor new scanner
snapshots during a running production process. If the TIP900
SW will be terminated, the scanner snapshots will be shifted
into subfolders of the Log directory. The Incoming directory
will be cleared each time the TIP900 SW is restarted.
The default directory where recipes are located. All recipes
within this directory are shown in the drop-down-control within
the "Product Recipe" and "Edit Recipe" dialogs.
The directory where all logs are saved to. It is also the parent
directory for the Archive-Directories for all models.
This is the hidden Supervisor password, which has to be set
by the Supervisor and shall not made public to everyone.
-- Primary Network Adapter --
This is the unique 48 Bit network adapter address, assigned
by the network adapter manufacturer.
Rev. E1 Feb 2016
Operation
Application Tab(2)
47
Advertisement
Table of Contents
