Table of Contents
Advertisement
5.2.1.2 The Board Map display domain
Please see under chapter 5.2.1 for detailed information regarding the boards map domain location on
the PC screen of the TIP900 monitoring and defect identification SW.
The board map display shows in an assigned domain the currently produced and scanned gypsum
wallboards, which just passed the line scanner (thermal imager).
In dependence of the specific product recipe you see 1, 2, 3...8 boards in parallel, which pass by.
See the red marked domain elements, which are described in hereafter.
1
6
Figure 61: Board map domain with marked sub-domains
: Temperature color table as temperature bar, to distinguish the different board temperature values
1
by color.
: Temperature color slider, to allow in normal mode (no auto scaling activated) to shift the color
2
temperature assignment manually.
TIP900
2
9
Rev. E1 Feb 2016
2
7
Operation
3
4
8
10
9
63
5
Advertisement
Table of Contents
