Installation Of The Temperature Compensation Set; Mechanical Installation Of The Temperature Compensation Set; Figure 27: Upper And Lower Telescope Arm Fixtures Installed After Kiln Exit; Figure 28: Schematic Of Kiln And Deck Outfeed Arrangement - Fluke TIP900 Operating Instructions Manual

Installation

4.4 Installation of the Temperature Compensation set

4.4.1 Mechanical Installation of the Temperature Compensation set

For the temperature compensation set there are three items, which need to be installed to guarantee a
proper functionality.

Upper telescope arm fixture, equipped with an IR sensor head, tilted mirror, air-purge unit, 15m
sensor cable and air-purge supply inlet hose

Lower telescope arm fixture as target (black counter paddle) for correct temperature reading

Aluminum die casting box for IR-Sensor to LAN connection
Please see chapter 3.1.2 until 3.1.4 for the dimensions and mounting points of the three items.

Figure 27: Upper and lower telescope arm fixtures installed after kiln exit

Figure 28: Schematic of kiln and deck outfeed arrangement

32
Rev. E1 Feb 2016
TIP900