Table of Contents
Advertisement
Operation
Language:
Software Logging:
Hardware Logging:
Min. free disk space:
Reminder interval:
Filter change interval:
Deck #1:
Count of maps for avg. dryer pro..:
Scaling Type:
# of Decks:
Default Min. time Dropgate Scanner:
Default Max. time Dropgate Scanner: The default maximum time between a dropgate signal set and
48
-- Language Settings --
Program language setting to the specific location, where the
program is in use. It is the application language in the TIP900
application and in the LogViewer program. Changes require
an application restart to take effect.
-- Service/Debug Logging --
Internal logging of the software. Software logging is NOT
required for general usage.
Internal logging of the hardware connections. Hardware
logging is NOT required for general usage.
-- Free Disk Space Settings --
The minimum amount of free disk space before the warning
is issued.
When a Free Disc Space warning was already issued, how
long to wait up to remind the warning again.
-- Filter Change Interval --
The interval in days, after the filters in the scanner cabinet and
the Touch Panel PC cabinet should be changed.
-- Dryer Profile Settings –
Sets the position of deck #1 in the dryer profile view.
#1 can be on "top" or at the "bottom".
The number of board maps for averaging to determine an
averaged dryer profile view.
Type of temperature scaling method for the dryer profile.
Possible selection criteria are "Manually" and "Automatic".
-- Environment Settings --
Number of existing kiln/dryer decks. Up to 16 decks are
supported by the TIP900 software.
The default minimum time between a dropgate signal set and
the scanning start of a board. To avoid configuration errors,
"Min. time Dropgate → Scanner" has to be smaller than "Max.
time Dropgate → Scanner" and the distance between them
should be at least 1 second. This parameter will be overridden
by the corresponding recipe parameter.
the scanning start of a board. To avoid configuration errors,
"Min. time Dropgate → Scanner" has to be smaller than "Max.
Rev. E1 Feb 2016
Deck
TIP900
Advertisement
Table of Contents
