Table of Contents
Advertisement
Operation
5.2.1.3.6 The Vertical Slice through the boards map
1
1
Figure 67: Vertical Slice Display shown in the right display section
The vertical slice display delivers a thermal image view per scanned line over the board's longitudinal
direction, whereas the displayed wallboard length depends on the board's conveyance velocity.
With the selection of the vertical slice display in the right hand side process screens domain, on the left
hand side "Board Map" domain display appears a vertical slice selection line.
1
The line can be selected by moving the cursor over the vertical line until the standard cursor arrow
changes into a double arrow symbol and both vertical line end triangles change from white color to
orange color. Click on the line and hold the pressed selection button to shift the line along the horizontal
board orientation. The desired X-position, where you release the pressed selection button, delivers the
vertical slice display of the currently processed boards, shown in the right hand side section.
The black curve displays the vertical slice of the normalized board temperature values. That means all
background temperature values will be normalized to 0°C / 32°F by a sophisticated SW algorithm.
A bottom slider allows the individual display adaption (extension, compression) of the X-axis
temperature values for the vertical slice.
70
TIP900
Rev. E1 Feb 2016
Advertisement
Table of Contents
