Table of Contents
Advertisement
6. Configuration
It is strongly recommended to run the TIP900 software exclusively on the PC!
For the TIP900 system, it is necessary to disable Windows default power
management settings in order to avoid that the computer goes to sleep
automatically.
Make sure that a possible firewall does not block needed communication ports
The following sections of this manual describe the HW and SW configuration of the TIP900 system.
A complete configuration requires the following steps:
1. Installation of the system software.
2. Configure the system HW and SW.
Before proceeding with the following sections please ensure that the physical installation
(communication and power wiring, air, water if necessary, etc.) is completed and working satisfactorily.
6.1 TIP900 HW Configuration
The manufacturer preconfigures all TIP900 hardware items, which are shipped to customers. A final
customer specific configuration has to be made on-site the customers premises during system
installation.
6.2 TIP900 SW Configuration
The TIP900 SW package will be already preinstalled and preconfigured by the manufacturer. All HW
and SW items are tested in an overall system test, prior to shipment. Customer and production (recipe)
specific configuration tasks have to be performed by trained and authorized personnel. Please refer to
chapter 5.2.1.1.2 until 5.2.1.1.7 for all relevant SW configuration items, which are modifiable by the
supervisor.
TIP900
Other applications could affect function and performance.
Rev. E1 Feb 2016
Configuration
93
Advertisement
Table of Contents
